What should be done if tetrahydrothiophene leaks

1、 Leakage disposal plan (safety protection)

Before disposing of tetrachlorophene leaks, it is necessary to provide safety protection for workers to reduce harm to human health. The specific measures are as follows:

Wear chemical protective clothing, gloves, and other protective equipment.

Wear respiratory protective equipment such as protective face shields and glasses.

Adequate ventilation to avoid the accumulation of tetrahydrophene vapor.

In case of small leakage, use activated carbon or other inert materials to absorb it, or use lotion made of incombustible dispersant to scrub, and put the detergent into the wastewater system after dilution.

2、 Remove leak source

For the site of tetrahydrophene leakage, it is necessary to clean up for the first time and remove the source of the leakage. The specific steps are as follows:

1. Block the leakage area and stop the leakage

2. Use anti leakage agents to absorb tetrachlorophene, such as sand, bentonite, professional anti leakage agents, etc

3. Clean the leakage area with a special cleaning agent

4. Cut off the source of leakage as much as possible to prevent entry into restricted spaces such as sewers and drainage ditches.

3、 Curing and processing

After cleaning up the tetrahydrophene in the leakage area, further treatment is needed to prevent it from volatilizing again and causing pollution to the environment. The specific handling measures are as follows:

If the content of tetrahydrophene is high, sample and analyze it, and confirm that the cleaning is complete before proceeding to the next step of processing

2. Choose a suitable curing agent for curing treatment. A wide range of curing agents include calcium powder, cement, sodium hydroxide, calcium hydroxide, etc

3. Disinfect the solidified leakage area and clean the surrounding environment

In case of small leakage, use activated carbon or other inert materials to absorb it, or use lotion made of incombustible dispersant to scrub, and the washing solution will be diluted and put into the waste water system